Display Rmon Eventlog - H3C S7500E Series Command Manual

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches
Examples
# Display the configuration of RMON event table.
<Sysname> display rmon event
Event table 1 owned by user1 is VALID.
Description: null.
Will cause log-trap when triggered, last triggered at 0days 00h:02m:27s.
Table 2-2 Description on the fields of the display rmon event command
Event table
owned by
VALID
Description
cause log-trap when triggered
last triggered at

2.1.3 display rmon eventlog

Syntax
display rmon eventlog [ entry-number ]
View
Any view
Parameters
entry-number: Index of an event entry, in the range 1 to 65535. If no entry number is
specified, the log information for all event entries is displayed.
Description
Use the display rmon eventlog command to display log information for the specified
or all event entries.
If you use the rmon event command to specify that the action of an entry includes
logging, then when this event is triggered, the event log is retained in the RMON log list.
You can use the display rmon eventlog command to display detailed log information
Field
Event entry number
Owner of the entry
Status of the entry identified by the index (VALID
means the entry is valid, and UNDERCREATION
means invalid. You can use the display rmon
command to view the invalid entry and with the
display current-configuration and display this
commands you cannot view the corresponding
rmon commands.)
Description for the event
The event will trigger logging and trapping.
Last time the event was triggered
2-3
Chapter 2 RMON Configuration Commands
Description