Display Poe Power-Usage - H3C S7500E Series Command Manual

Command Manual – PoE
H3C S7500E Series Ethernet Switches
Eth2/0/44
Eth2/0/45
Eth2/0/46
Eth2/0/47
Eth2/0/48
--- 2 port(s) on,
Table 1-4 Description on the fields of the display poe interface power command
Interface
CurPower
PeakPower
MaxPower
PD Description
port(s) on
consumed
Remaining

1.1.6 display poe power-usage

Syntax
display poe power-usage
View
Any view
Parameters
None
Description
Use the display poe power-usage command to display the power information of the
PoE power and all PSEs
Examples
# Display the power information of the PoE power and all PSEs.
<Sysname> display poe power-usage
PoE Current Power
0.0 0.0
0.0 0.0
0.0 0.0
0.0 0.0
0.0 0.0
9.1 (W) consumed,
Field
Shortened form of a PoE interface
Current power of a PoE interface
Peak power of a PoE interface
Maximum power of a PoE interface
Description of the PD connected with a PoE interface When
the description contains more than 34 characters, the first 30
characters followed by four dots are displayed.
Number of PoE interfaces that are supplying power
Power currently consumed by all PoE interfaces
Total remaining power of the system
Chapter 1 PoE Configuration Commands
15.4
15.4
15.4
15.4
15.4
90.9 (W) remaining ---
Description
: 2 W
1-10