Display Rrpp Brief - H3C S7500E Series Command Manual

Command Manual – RRPP
H3C S7500E Series Ethernet Switches

1.1.2 display rrpp brief

Syntax
display rrpp brief
View
Any view
Parameters
None
Description
Use the display rrpp brief command to display the brief information of RRPP
configuration.
Examples
# Display the brief information of RRPP configuration.
<Sysname> display rrpp brief
Flags for Node Mode :
M –- Master , T -- Transit , E -- Edge , A -- Assistant-Edge
RRPP Protocol Status: Enable
Number of RRPP Domains: 2
Domain ID
Control VLAN
Hello Timer
Ring
ID
-------------------------------------------------------------------------
1
Domain ID
Control VLAN
Hello Timer
Ring
ID
-------------------------------------------------------------------------
1 0
: 1
: Major 5
: 1 sec Fail Timer : 3
Ring Node Primary/Common
Level Mode Port
1 M GigabitEthernet3/0/1
: 2
: Major 10
: 1 sec Fail Timer : 3
Ring Node Primary/Common
Level Mode Port
M GigabitEthernet3/0/3
Chapter 1 RRPP Configuration Commands
Sub 6
sec
Sub 11
sec
1-2
Secondary/Edge
Port
GigabitEthernet3/0/2
Secondary/Edge
Port
GigabitEthernet3/0/4
Enable
Status
Yes
Enable
Status
Yes