Poe-Profile - H3C S7500E Series Command Manual

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – PoE

H3C S7500E Series Ethernet Switches

1.1.34 poe-profile

poe-profile profile-name [ index ]

undo poe-profile { index index | name profile-name }

profile-name: Name of a PoE configuration file, a string of 1 to 15 characters. A PoE

configuration file name begins with a letter (a through z or A through Z) and must not

contain reserved keywords such as undo, all, name, interface, user, poe, disable,

max-power, mode, priority and enable.

index: Index number of a PoE configuration file, in the range 1 to 100.

Use the poe-profile profile-name command to create a PoE configuration file and enter

PoE-profile view.

Use the undo poe-profile command to delete the specified PoE configuration file.

If no index is specified, the system automatically assigns an index to the PoE

configuration file, starting from 1.

Note that if a PoE configuration file is already applied to a PoE interface, you cannot

delete it. To delete the file, you must first execute the undo apply poe-profile

command to remove the application of the PoE configuration file to the PoE interface.

# Create a PoE configuration file, name it abc, and specify the index number as 3.

<Sysname> system-view

[Sysname] poe-profile abc 3

Chapter 1 PoE Configuration Commands

Table of Contents