Display Arp - H3C S7500E Series Command Manual

Command Manual – ARP
H3C S7500E Series Ethernet Switches
Description
Use the arp timer aging command to set aging time for dynamic ARP entries.
Use the undo arp timer aging command to restore the default.
Related commands: display arp timer aging.
Examples
# Set aging time for dynamic ARP entries to 10 minutes.
<Sysname> system-view
[Sysname] arp timer aging 10

1.1.4 display arp

Syntax
display arp { { all | dynamic | static } [ slot slot-id ] | vlan vlan-id | interface
interface-type interface-number } [ [ verbose ] [ | { begin | exclude | include } string ] |
count ]
View
Any view
Parameters
all: Displays all ARP entries.
dynamic: Displays dynamic ARP entries.
static: Displays static ARP entries.
slot slot-id: Displays the ARP entries of the specified slot.
vlan vlan-id: Displays the ARP entries of the specified VLAN. The VLAN ID ranges from
1 to 4,094.
interface interface-type interface-number: Displays the ARP entries of the port
specified by the argument interface-type interface-number.
verbose: Displays detailed information about ARP entries.
|: Uses a regular expression to specify the ARP entries to be displayed. For detailed
information about regular expression, refer to the part discussing CLI display in System
Maintaining and Debugging Configuration.
begin: Displays ARP entries from the first one containing the specified string.
exclude: Displays the ARP entries that do not contain the specified string.
include: Displays the ARP entries containing the specified string.
string: A case-sensitive string for matching, consisting of 1 to 256 characters.
count: Displays the number of ARP entries.
Chapter 1 ARP Configuration Commands
1-3