H3C S7500E Series Command Manual page 632

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
5.1.36 peer capability-advertise route-refresh
Syntax
peer { ipv6-group-name | ipv6-address } capability-advertise route-refresh
undo peer { ipv6-group-name | ipv6-address } capability-advertise route-refresh
View
IPv6 address family view
Parameters
ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
Description
Use the peer capability-advertise route-refresh command to enable IPv6 BGP
route-refresh.
Use the undo peer capability-advertise route-refresh command to disable the
function.
By default, route-refresh is enabled.
Examples
# Disable route-refresh of peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100
[Sysname-bgp-af-ipv6] undo peer 1:2::3:4 capability-advertise route-refresh
5.1.37 peer connect-interface
Syntax
peer { ipv6-group-name | ipv6-address } connect-interface interface-type
interface-number
undo peer { ipv6-group-name | ipv6-address } connect-interface
View
IPv6 address family view
Parameters
ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
Chapter 5 IPv6 BGP Configuration Commands
5-32