H3C S7500E Series Command Manual page 1274

Command Manual – File System Management
H3C S7500E Series Ethernet Switches
Parameters
None
Description
Use the close command to terminate the connection to the FTP server, but remain in
FTP client view.
This command is equal to the disconnect command.
Examples
# Terminate the connection to the FTP server and remain in FTP client view.
[ftp] close
221 Server closing.
[ftp]
2.2.7 debugging
Syntax
debugging
undo debugging
View
FTP client view
Default Level
3: Manage level
Parameters
None
Description
Use the debugging command to enable FTP client debugging.
Use the undo debugging command to disable FTP client debugging.
By default, FTP client debugging is disabled.
Examples
# The device serves as the FTP client. Enable FTP client debugging and use the active
mode to download file sample.file from the current directory of the FTP server.
<Sysname> terminal monitor
<Sysname> terminal debugging
<Sysname> ftp 192.168.1.46
Chapter 2 FTP Configuration Commands
2-8