Reset Ipv6 Neighbors; Reset Ipv6 Pathmtu - H3C S7500E Series Command Manual

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches

1.1.38 reset ipv6 neighbors

Syntax
reset ipv6 neighbors { all | dynamic | interface interface-type interface-number | slot
slot-number | static }
View
User view
Parameters
all: Clears the static and dynamic neighbor information on all interfaces.
dynamic: Clears the dynamic neighbor information on all interfaces.
interface interface-type interface-number: Clears dynamic neighbor information on a
specified interface.
slot slot-number: Clears the dynamic neighbor information on a specified slot.
static: Clears the static neighbor information on all interfaces.
Description
Use the reset ipv6 neighbors command to clear IPv6 neighbor information.
Examples
# Clear neighbor information on all interfaces.
<Sysname> reset ipv6 neighbors all

1.1.39 reset ipv6 pathmtu

Syntax
reset ipv6 pathmtu { all | static | dynamic }
View
User view
Parameters
all: Clears all PMTUs.
static: Clears all static PMTUs.
dynamic: Clears all dynamic PMTUs.
Description
Use the reset ipv6 pathmtu the command to clear the PMTU information.
Chapter 1 IPv6 Basics Configuration Commands
1-39