H3C S7500E Series Command Manual page 1288

Command Manual – File System Management
H3C S7500E Series Ethernet Switches
View
FTP client view
Parameters
None
Description
Use the pwd command to display the working directory on the remote FTP server.
Examples
# Display the working directory on the remote FTP server.
[ftp] pwd
257 "flash:/temp" is current directory.
2.2.24 quit
Syntax
quit
View
FTP client view
Parameters
None
Description
Use the quit command to disconnect from the remote FTP server and exit to user view.
Examples
# Disconnect from the remote FTP server and exit to user view.
[ftp] quit
221 Server closing.
<Sysname>
2.2.25 remotehelp
Syntax
remotehelp [ protocol-command ]
Chapter 2 FTP Configuration Commands
2-22