H3C S7500E Series Command Manual page 718

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – IPv6 Configuration

H3C S7500E Series Ethernet Switches

A proper tunnel type can be selected for packet encapsulation according to the

network topology and application. The same tunnel type must be configured at

both ends of the tunnel. Otherwise, packet delivery will fail.

Only one automatic tunnel can be configured at the same tunnel source.

# Specify the tunnel type as IPv6 over IPv4 for a tunnel interface.

<Sysname> system-view

[Sysname] interface tunnel 1/0/3

[Sysname-Tunnel1/0/3] tunnel-protocol ipv6-ipv4

Chapter 3 Tunneling Configuration Commands

Chapters

Table of Contents