H3C S7500E Series Command Manual page 1041

Command Manual – DHCP
H3C S7500E Series Ethernet Switches
1.1.20 expired
Syntax
expired { day day [ hour hour [ minute minute ] ] | unlimited }
undo expired
View
DHCP address pool view
Parameters
day day: Specifies the number of days, in the range of 0 to 365.
hour hour: Specified the number of hours, in the range of 0 to 23.
minute minute: Specifies the number of minutes, in the range of 0 to 59.
unlimited: Specifies the infinite duration, which is actually 136 years.
Description
Use the expired command to specify the lease duration in a DHCP address pool.
Use the undo expired command to restore the default lease duration in a DHCP
address pool.
The lease duration defaults to one day.
Note that if the lease duration you specified is beyond the year 2106, the system
regards the lease as expired.
Related commands: dhcp server ip-pool.
Examples
# Specify the lease duration as one day, two hours and three minutes in DHCP address
pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] expired day 1 hour 2 minute 3
1.1.21 gateway-list
Syntax
gateway-list ip-address&<1-8>
undo gateway-list { ip-address | all }
View
DHCP address pool view
Chapter 1 DHCP Server Configuration Commands
1-17