Display Clock - H3C S7500E Series Command Manual

Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches
Description
Use the display clipboard command to view the contents of the clipboard.
To copy the specified content to the clipboard:
Move the cursor to the starting position of the content and press the
<Esc+Shift+,> combination ("," is an English comma).
Move the cursor to the ending position of the content and press the
<Esc+Shift+.> combination ("." is an English dot) to copy the specified content
to the clipboard.
Examples
# View the content of the clipboard.
<Sysname> display clipboard
---------------- CLIPBOARD-----------------

1.1.7 display clock

Syntax
display clock
View
Any view
Parameters
None
Description
Use the display clock command to view the current system time and date.
The current system time and date are decided by the clock datetime, clock
summer-time one-off (or clock summer-time repeating), clock timezone. Refer to
Configuring the system clock in the operation manual for the detailed rules.
Related commands: clock
summer-time repeating, clock timezone.
Examples
# Display the current time and date.
<Sysname> display clock
09:41:23 UTC Thu 12/15/2005
ip route 10.1.0.0 255.0.0.0 eth 0
Chapter 1 Basic Configuration Commands
datetime, clock summer-time
1-7
one-off, clock