Reset Igmp-Snooping Statistics - H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches
This command cannot clear IGMP Snooping forwarding entries of static joins.
Examples
# Clear all IGMP Snooping forwarding entries saved in the switch.
<Sysname> reset igmp-snooping group all

1.1.32 reset igmp-snooping statistics

Syntax
reset igmp-snooping statistics
View
User view
Parameters
None
Description
Use the reset igmp-snooping statistics command to clear the statistics information of
IGMP messages learned by IGMP Snooping.
Examples
# Clear the statistics information of all kinds of IGMP messages learned by IGMP
Snooping.
<Sysname> reset igmp-snooping statistics
1.1.33 router-aging-time
Syntax
router-aging-time interval
undo router-aging-time
View
IGMP-Snooping view
Parameters
interval: Router port aging time, in units of seconds. The effective range is 1 to 1,000.
Description
Use the router-aging-time command to configure the aging time of router ports
globally.
Chapter 1 IGMP Snooping Configuration Commands
1-28