Radius Scheme - H3C S7500E Series Command Manual

Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
<Sysname> system-view
[Sysname] radius nas-ip 129.10.10.1

1.2.11 radius scheme

Syntax
radius scheme radius-scheme-name
undo radius scheme radius-scheme-name
View
System view
Parameters
radius-scheme-name: RADIUS scheme name, a case-insensitive string of 1 to 32
characters.
Description
Use the radius scheme command to create a RADIUS scheme and enter RADIUS
scheme view.
Use the undo radius scheme command to delete a RADIUS scheme.
By default, no RADIUS scheme is defined.
Note that:
The RADIUS protocol is configured scheme by scheme. Every RADIUS scheme
must at least specify the IP addresses and UDP ports of the RADIUS
authentication/authorization/accounting servers and the parameters necessary for
a RADIUS client to interact with the servers.
A RADIUS scheme can be referenced by more than one ISP domain at the same
time.
You cannot remove the RADIUS scheme being used by online users with the
undo radius scheme command.
Related commands: key, retry realtime-accounting, timer realtime-accounting,
stop-accounting-buffer enable, retry stop-accounting, server-type, state,
user-name-format, retry, display radius scheme, display radius statistics.
Examples
# Create a RADIUS scheme named radius1 and enter RADIUS scheme view.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1]
Chapter 1 AAA/RADIUS/HWTACACS
1-45
Configuration Commands