Display Dhcp Relay Statistics - H3C S7500E Series Command Manual

Command Manual – DHCP
H3C S7500E Series Ethernet Switches
No.
1
2
Table 2-4 Description on fields of the display dhcp relay server-group command
No.
Group IP

2.1.18 display dhcp relay statistics

Syntax
display dhcp relay statistics [ server-group { group-id | all } ]
View
Any view
Parameters
group-id: Specifies a server group number in the range of 0 to 19 about which to display
DHCP packet statistics.
all: Specifies all server groups about which to display DHCP packet statistics.
Information for each group will be displayed.
Description
Use the display dhcp relay statistics command to display DHCP packet statistics
related to a specified or all DHCP server groups.
Note that if no parameter (server-group and all) is specified, all DHCP packet statistics
on the relay agent will be displayed.
Examples
# Display all DHCP packet statistics on the relay agent.
<Sysname> display dhcp relay statistics
Bad packets received:
DHCP packets received from clients:
Group IP
1.1.1.1
1.1.1.2
Field
DHCPDISCOVER packets received:
DHCPREQUEST packets received:
DHCPINFORM packets received:
DHCPRELEASE packets received:
DHCPDECLINE packets received:
BOOTPREQUEST packets received:
Chapter 2 DHCP Relay Agent Configuration
Sequence number
IP address in the server group
0
0
0
0
0
0
0
0
2-14
Commands
Description