Reset Mac-Authentication Statistics - H3C S7500E Series Command Manual

Command Manual – 802.1x - MAC Authentication
H3C S7500E Series Ethernet Switches
Note that:
When the user's source MAC address is used as the username, the password is
also that MAC address.
In cipher display mode, a password in plain text with no more than 16 characters
will be encrypted into a password in cipher text with 24 characters, and a
password in plain text with 16 to 63 characters will be encrypted into a password in
cipher text with 88 characters. For a password with 24 characters, the system will
determine whether it can decrypt the password. If so, it treats the password as a
cipher-text one. Otherwise, it treats it as a plain-text one.
Related commands: display mac-authentication.
Examples
# Configure the username for MAC authentication as abc, and the password displayed
in plain text as xyz.
<Sysname> system-view
[Sysname] mac-authentication user-name-format fixed account abc password
simple xyz

3.1.6 reset mac-authentication statistics

Syntax
reset mac-authentication statistics [ interface interface-list ]
View
User view
Parameters
interface interface-list: Specifies an Ethernet port list, in the format of { interface-type
interface-number [ to interface-type interface-number ] }&<1-10>, where &<1-10>
indicates that you can specify up to 10 port ranges. A port range defined without the to
interface-type interface-number portion comprises only one port.
Description
Use the reset mac-authentication statistics command to clear MAC authentication
statistics.
Note that:
If you do not specify the interface-list argument, the command clears the global
MAC authentication statistics and the MAC authentication statistics on all ports.
If you specify the interface-list argument, the command clears the MAC
authentication statistics on the specified ports.
Related commands: display mac-authentication.
Chapter 3 MAC Authentication Configuration
3-7
Commands