Reset Bgp Ipv - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Parameters
ipv6-address: Soft-resets the connection with an IPv6 BGP peer.
all: Soft-resets all IPv6 BGP connections.
external: Soft-resets EBGP connections.
group ipv6-group-name: Soft-resets connections with a peer group. The name of the
peer group is a string of 1 to 47 characters.
internal: Soft-resets IBGP connections.
export: Performs soft reset in outbound direction.
import: Performs soft reset in inbound direction.
Description
Use the refresh bgp ipv6 command to soft reset specified IPv6 BGP connections.
With this feature, you can refresh the IPv6 BGP routing table and apply a new available
policy without tearing down BGP connections.
To perform IPv6 BGP soft reset, all routers in the network should support route-refresh.
If a router not supporting route refresh exists in the network, you need to use the peer
keep-all-routes command on the local router to save all route updates before
performing soft reset.
Examples
# Soft reset inbound IPv6 BGP connections.
<Sysname> refresh bgp ipv6 all import

5.1.61 reset bgp ipv6

Syntax
reset bgp ipv6 { as-number | ipv6-address [ flap-info ] | all | group ipv6-group-name |
external | internal }
View
User view
Parameters
as-number: Resets the IPv6 BGP connections to peers in the specified AS.
ipv6-address: Resets the connection to the specified IPv6 BGP peer.
flap-info: Clears the history information of routing flaps.
all: Resets all IPv6 BGP connections.
group ipv6-group-name: Resets the connections to the specified IPv6 BGP peer
group.
Chapter 5 IPv6 BGP Configuration Commands
5-51