H3C S7500E Series Command Manual page 1249

Command Manual – File System Management
H3C S7500E Series Ethernet Switches
This command supports the wildcard *.
Examples
# Display information about all files and folders.
<Sysname> dir /all
Directory of flash:/
0 -rw-
1 -rwh
2 -rw-
3 -rw-
4 -rwh
5 -rwh
6 -rw-
64389 KB total (16166 KB free)
[ ] indicates this file is in the recycle bin.
1.1.5 execute
Syntax
execute filename
View
System view
Parameters
filename: Name of a batch file with a .bat extension.
Description
Use the execute command to execute the specified batch file.
Batch files are command line files. Executing a batch file is to execute a set of
command lines in the file.
You should not include invisible characters in a batch file. If an invisible character is
found during the execution, the batch process will abort and the commands that have
been executed cannot be cancelled.
Not every command in a batch file is sure to be executed. For example, if a certain
command is not correctly configured, the system omits this command and goes to the
next one.
A batch file does not support hot backup.
Each configuration command in a batch file must be a standard configuration command,
meaning the valid configuration information which can be displayed with the display
6985954 Apr 26 2005 21:06:29
1842 Apr 27 2005 04:37:17
1518 Apr 26 2005 12:05:38
2045 May 04 2005 15:50:01
428 Apr 27 2005 16:41:21
572 Apr 27 2005 16:41:31
2737556 Oct 12 2005 01:31:44
1-4
Chapter 1 File System Management Commands
mainup.bin
private-data.txt
config.cfg
backcfg.cfg
hostkey
serverkey
[a.app]