H3C S7500E Series Command Manual page 1294

Command Manual – File System Management
H3C S7500E Series Ethernet Switches
Chapter 3 TFTP Configuration Commands
3.1 TFTP Client Configuration Commands
3.1.1 display tftp client configuration
Syntax
display tftp client configuration
View
Any view
Parameters
None
Description
Use the display tftp client configuration command to display the configuration
information of the TFTP client.
Related commands: tftp client source.
Examples
# Display the current configuration information of the TFTP client.
<Sysname> display tftp client configuration
The source IP address is 192.168.0.123
Note:
Currently this command displays the source address configuration information. If the
currently valid source address is the source IP address, the configured source IP
address is displayed; if the currently valid address is the source interface, the
configured source interface is displayed.
3.1.2 tftp-server acl
Syntax
tftp-server [ ipv6 ] acl acl-number
undo tftp-server [ ipv6 ] acl
Chapter 3 TFTP Configuration Commands
3-1