Display Poe-Power Supervision-Module - H3C S7500E Series Command Manual

Command Manual – PoE
H3C S7500E Series Ethernet Switches
Output AC Current A/B/C Alarm
Volt Phrase AB/BC/CA Alarm

1.1.14 display poe-power supervision-module

Syntax
display poe-power supervision-module
View
Any view
Parameters
None
Description
Use the display poe-power supervision-module command to display the information
of the monitoring module of the PoE power.
Examples
# Display the information of the monitoring module of the PoE power.
<Sysname> display poe-power supervision-module
Supervision Version
Supervision Name
PoE Power Type
PoE Current Power
PoE Average Power
PoE Peak Power
PoE Nominal Power
PSU Available Number
PSU 1:
Nominal Output Power
Hardware Version Info
Table 1-13 Description on the fields of display poe-power supervision-module
Supervision Version
Supervision Name
Field
Field
Software version number of the monitoring module of
the PoE power
Name of the monitoring module of the PoE power
Chapter 1 PoE Configuration Commands
Description
Output three-phase AC current state. See
1-8.
AC voltage input state. See
: 2.6
: Summer Pms
: PSE2500-A
: 600 W
: 630 W
: 650 W
: 2400 W
: 1
: 2500(W)(220V)/1250(W)(110V)
: NP Series
Description
1-20
Table
Table 1-8.