H3C S7500E Series Command Manual page 1475

Command Manual – PoE
H3C S7500E Series Ethernet Switches
View
Any view
Parameters
pse-id: PSE ID. You can use the display poe device command to view the mapping
between PSE ID and slot. If you enter a PSE ID, the information of the PSE is displayed.
Otherwise, the information of all PSEs on the device is displayed.
Description
Use the display poe pse command to display the information of the specified PSE.
Examples
# Display the information of PSE 7.
<Sysname> display poe pse 7
PSE ID
PSE Slot No
PSE SubSlot No
PSE Model
PSE Power Enabled
PSE Power Preempted
PSE Power Priority
PSE Current Power
PSE Average Power
PSE Peak Power
PSE Max Power
PSE Remaining Guaranteed
PSE CPLD Version
PSE Software Version
PSE Hardware Version
PSE Legacy Detection
PSE Utilization-threshold
PSE Pse-policy Mode
PSE Pd-policy Mode
PSE PD Disconnect Detect Mode
Table 1-6 Description on the fields of the display poe pse command
PSE ID
PSE Slot No
PSE Model
Field
ID of the PSE
Slot number of the PSE
Model of the PSE module
1-12
Chapter 1 PoE Configuration Commands
: 7
: 0
: 0
: LSQ1FV48SA
: enable
: no
: low
: 9 W
: 8 W
: 11 W
: 100 W
: 100 W
: -
: 503
: 1
: enable
: 80
: priority
: priority
: AC
Description