H3C S7500E Series Command Manual page 979

Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
<Sysname> reset hwtacacs statistics all
1.3.12 reset stop-accounting-buffer
Syntax
reset stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name [ slot
slot-number ]
View
User view
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies a HWTACACS scheme by its
name, a string of 1 to 32 characters.
slot slot-number: Specifies the slot where the interface card is inserted.
Description
Use the
stop-accounting requests that get no responses.
Related commands: stop-accounting-buffer enable, retry stop-accounting,
display stop-accounting-buffer.
Examples
# Clear the buffered stop-accounting requests for HWTACACS scheme hwt1.
<Sysname> reset stop-accounting-buffer hwtacacs-scheme hwt1
1.3.13 retry stop-accounting
Syntax
retry stop-accounting retry-times
undo retry stop-accounting
View
HWTACACS scheme view
Parameters
retry-times: Maximum number of stop-accounting request transmission attempts. It
ranges from 1 to 300 and defaults to 100.
reset stop-accounting-buffer
Chapter 1 AAA/RADIUS/HWTACACS
command
1-70
Configuration Commands
to clear the buffered