Info-Center Channel Name - H3C S7500E Series Command Manual

Command Manual – Information Center
H3C S7500E Series Ethernet Switches
Table 1-9 Descriptions on the fields of the display trapbuffer command
Trapping buffer
configuration and contents
Allowed max buffer size
Actual buffer size
Channel number
Channel name
Dropped messages
Overwritten messages
Current messages

1.1.8 info-center channel name

Syntax
info-center channel channel-number name channel-name
undo info-center channel channel-number
View
System view
Parameters
channel-number: Specifies a channel number, in the range 0 to 9.
channel-name: Specifies a channel name, a string of 1 to 30 characters, case
insensitive. It must be an alphanumeric set startting with a letter.
Description
Use the info-center channel name command to name a channel with a specified
channel number.
Use the undo info-center channel command to restore the default name for a channel
with a specified channel number.
Refer to
Examples
# Name channel 0 as abc.
Field
Table 1-1 for details of default channel names and channel numbers.
Chapter 1 Information Center Configuration
Description
Indicates the current state of the trap buffer and its
contents, which could be enabled or disabled.
The maximum buffer size allowed
The actual buffer size
The channel number of the trap buffer, defaults to 3
The channel name of the trap buffer, defaults to
trapbuffer
The number of dropped messages
The number of overwritten messages (when the
buffer size is not big enough to hold all messages,
the latest messages overwrite the old ones).
The number of the current messages
1-11
Commands