Qos Policy Configuration Commands - H3C S7500E Series Command Manual

Command Manual – QoS
H3C S7500E Series Ethernet Switches
Related commands: qos policy, qos apply policy, classifier behavior.
Examples
# Define a traffic behavior named behavior1.
<Sysname> system-view
[Sysname] traffic behavior behavior1
[Sysname-behavior-behavior1]

2.3 QoS Policy Configuration Commands

2.3.1 classifier behavior
Syntax
classifier classifier-name behavior behavior-name
undo classifier classifier-name
View
Policy view
Parameters
classifier-name: Name of an existing class.
behavior–name: Name of an existing traffic behavior.
Description
Use the classifier behavior command to associate a traffic behavior with a class.
Use the undo classifier command to remove a class from a policy.
Note that each class can be associated with only one traffic behavior.
Related commands: qos policy.
Note:
In a QoS policy with multiple class-to-traffic-behavior associations, if the action of
creating an outer VLAN tag, the action of setting customer network VLAN ID, or the
action of setting service provider network VLAN ID is configured in a traffic behavior, we
recommend you not to configure any other action in this traffic behavior. Otherwise, the
QoS policy may not function as expected after it is applied.
Examples
# Associate the behavior named test with the class named database in the policy user1.
Chapter 2 QoS Policy Configuration Commands
2-18