Display Ipv6 Socket - H3C S7500E Series Command Manual

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches
Age
Type

1.1.9 display ipv6 socket

Syntax
display ipv6 socket [ socktype socket-type ] [ task-id socket-id ] [ slot slot-number ]
View
Any view
Parameters
socktype socket-type: Displays the socket information of this type. The socket type is
in the range of 1 to 3. The value "1" represents a TCP socket, "2" a UDP socket, and "3"
a raw IP socket.
task-id: Displays the socket information of the task. The task ID is in the range 1 to 100.
socket-id: Displays the information of the socket. The socket ID is in the range 0 to
3072.
slot-number: Number of a slot.
Description
Use the display ipv6 socket command to display socket information.
Examples
# Display the information of all sockets.
<Sysname> display ipv6 socket
SOCK_STREAM:
Task = VTYD(14), socketid = 4, Proto = 6,
LA = ::->22, FA = ::->0,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_ACCEPTCONN SO_REUSEPORT SO_SENDVPNID,
socket state = SS_PRIV SS_ASYNC
Task = VTYD(14), socketid = 3, Proto = 6,
LA = ::->23, FA = ::->0,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_ACCEPTCONN SO_REUSEPORT SO_SENDVPNID,
Field
Time for a PMTU to live. For a static PMTU, a
hyphen "-" is displayed.
Indicates the PMTU is dynamically negotiated or
statically configured.
1-11
Chapter 1 IPv6 Basics Configuration Commands
Description