Display Pim Neighbor - H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches
interface-type interface-number: Displays the information of join/prune messages to
send on the specified interface.
neighbor-address: Displays the information of join/prune messages to send to the
specified PIM neighbor.
verbose: Displays the detailed information of join/prune messages to send.
Description
Use the display pim join-prune command to view the information about the join/prune
messages to send.
Examples
# View the information of join/prune messages to send in the PIM-SM mode.
<Sysname> display pim join-prune mode sm
Expiry Time: 22 sec
Upstream nbr: 192.168.1.55 (Vlan-interface1)
0 (*, G) join(s), 1 (S, G) join(s), 0 (S, G, rpt) prune(s)
Expiry Time: 50 sec
Upstream nbr: 10.1.1.1 (Vlan-interface2)
1 (*, G) join(s), 0 (S, G) join(s), 1 (S, G, rpt) prune(s)
-------------------------------------------------------------------------
Total (*, G) join(s): 1, (S, G) join(s): 1, (S, G, rpt) prune(s): 1
Table 4-7 Description on the fields of the display pim join-prune command
Expiry Time:
Upstream nbr:
(*, G) join(s)
(S, G) join(s)
(S, G, rpt) prune(s)

4.1.21 display pim neighbor

Syntax
display pim neighbor [ interface interface-type interface-number | neighbor-address |
verbose ] *
Field
Expiry time of sending join/prune messages
IP address of the upstream PIM neighbor and the
interface connecting to it
Number of (*, G) joins to send
Number of (S, G) joins to send
Number of (S, G, rpt) prunes
Chapter 4 PIM Configuration Commands
Description
4-21