Dot1X Timer Ead-Timeout; Dot1X Url - H3C S7500E Series Command Manual

Command Manual – 802.1x - MAC Authentication
H3C S7500E Series Ethernet Switches

2.1.2 dot1x timer ead-timeout

Syntax
dot1x timer ead-timeout ead-timeout-value
undo dot1x timer ead-timeout
View
System view
Parameters
ead-timeout-value: EAD rule timeout time, in the range 1 minute to 1440 minutes.
Description
Use the dot1x timer ead-timeout command to set the EAD rule timeout time.
Use the undo dot1x timer ead-timeout command to restore the default.
By default, the timeout time is 30 minutes.
Related commands: display dot1x.
Examples
# Set the EAD rule timeout time to 5 minutes.
<Sysname> system-view
[Sysname] dot1x timer ead-timeout 5

2.1.3 dot1x url

Syntax
dot1x url url-string
undo dot1x [ url-string ]
View
System view
Parameters
url-string: Redirect URL, a case-sensitive string of 1 to 64 characters in the format
http://string.
Description
Use the dot1x url command to configure a URL to which the system redirects users'
HTTP access before they pass 802.1x authentication.
Use the undo dot1x url command to remove the redirect URL.
Chapter 2 EAD Fast Deployment
2-2
Configuration Commands