Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches
1.1.9 display diagnostic-information
Syntax
display diagnostic-information
View
Any view
Parameters
None
Description
Use the display diagnostic-information command to display or save the statistics of
each module's running status in the system.
When the system is out of order, you need to collect a lot of information to locate the
problem. At this time you can use the display diagnostic-information command to
collect prompt information of the commands display clock, display version, display
device, display current-configuration.
Examples
# Save the statistics of each module's running status in the system.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)?[Y/N]y
Please input the file name(*.diag)[flash:/default.diag]:aa.diag
Diagnostic information is outputting to flash:/aa.diag.
Please wait...
Save succeeded.
You can view the content of the file aa.diag by executing the more.aa.diag command in
user view, in combination of the <Page Up> and <Page Down> keys.
# Display the statistics of each module's running status in the system.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)?[Y/N]n
......Omitted......
1.1.10 display history-command
Syntax
display history-command
View
Any view
Chapter 1 Basic Configuration Commands
1-10