Reset Vrrp Statistics - H3C S7500E Series Command Manual

Command Manual – HA
H3C S7500E Series Ethernet Switches
Auth Failures
Invalid Auth Type
Auth Type Mismatch
Packet Length Errors
Address List Errors
Become Master
Priority Zero Pkts Rcvd
Advertise Rcvd
Advertise Sent
Global statistics
CheckSum Errors
Version Errors
VRID Errors

1.1.3 reset vrrp statistics

Syntax
reset vrrp
virtual-router-id ] ]
View
User view
Parameters
interface interface-type interface-number: Clears VRRP statistics of a specified
interface. interface-type interface-number specifies an interface by its type and number.
vrid virtual-router-id: Clears VRRP statistics of the specified standby group.
virtual-router-id specifies a standby group by its group number, in the range 1 to 255.
Description
Use the reset vrrp statistics command to clear VRRP statistics.
Field
Number of packets with authentication failures
Number of packets with authentication failures due
to invalid authentication types
Number of packets with authentication failures due
to mismatching authentication types
Number of packets with VRRP packet length errors
Number of packets with virtual IP address list
errors
Number of times that the switch worked as the
master
Number of received advertisements with the
priority of 0
Number of received advertisements
Number of advertisements sent
Statistics about all standby groups
Total number of packets with checksum errors
Total number of packets with version errors
Total number of packets with VRID errors
statistics [ interface
1-5
Chapter 1 VRRP Configuration Commands
Description
interface-type interface-number [ vrid