H3C S7500E Series Command Manual page 1278

Command Manual – File System Management
H3C S7500E Series Ethernet Switches
View
Any view
Parameters
None
Description
Use the display ftp client configuration command to display the configuration
information of the FTP client.
Note:
Currently this command displays the configuration information of the source address. If
the currently valid source address is the source IP address, this command displays the
configured source IP address; if it is the source interface, this command displays the
configured source interface.
Related commands: ftp client source.
Examples
# Display the current configuration information of the FTP client.
<Sysname> display ftp client configuration
The source IP address is 192.168.0.123
2.2.12 ftp
Syntax
ftp [ server-address [ service-port ] [ source { interface interface-type
interface-number | ip source-ip-address } ] ]
View
User view
Parameters
server-address: IP address or host name of a remote FTP server.
service-port: Port number of the remote FTP server, in the range 0 to 65535. The
default value is 21.
interface interface-type interface-number: Specifies the source interface by its type
and number. The primary IP address configured on this interface is the source address
Chapter 2 FTP Configuration Commands
2-12