Chapter 4 Ipv6 Is-Is Configuration Commands; Display Isis Route Ipv - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches

Chapter 4 IPv6 IS-IS Configuration Commands

4.1 IPv6 IS-IS Configuration Commands
Note:
IPv6 IS-IS supports all the features of IPv4 IS-IS except that it advertises IPv6
routing information instead. This document describes only IPv6 IS-IS exclusive
commands. Refer to IS-IS Commands in the part discussing IPv4 routing for other
IS-IS configuration commands.
At present, the LSQ1GP12EA boards in the S7500E series do not support IPv6.

4.1.1 display isis route ipv6

Syntax
display isis route ipv6 [ [ level-1 | level-2 ] | verbose ]* [ process-id ]
View
Any view
Parameters
verbose: Displays detailed IPv6 IS-IS routing information.
process-id: IS-IS process ID, in the range 1 to 65535.
level-1: Display Level-1 IPv6 IS-IS routes only.
level-2: Displays Level-2 IPv6 IS-IS routes only.
Note:
If no level is specified, both Level-1 and Level-2 (namely Level-1-2) routing information
will be displayed.
Description
Use the display isis route ipv6 command to display IPv6 IS-IS routing information.
Chapter 4 IPv6 IS-IS Configuration Commands
4-1