Information Center Configuration Commands; Display Channel - H3C S7500E Series Command Manual

Command Manual – Information Center
H3C S7500E Series Ethernet Switches
Chapter 1 Information Center Configuration

1.1 Information Center Configuration Commands

1.1.1 display channel

Syntax
display channel [ channel-number | channel-name ]
View
Any view
Parameters
channel-number: Displays information of the channel with a specified number, where
channel-number represents the channel number, in the range 0 to 9.
channel-name: Displays information of the channel with a specified name, where
channel-name represents the channel name, which could be a default name or a
self-defined name. The user needs to specify a channel name first before using it as a
self-defined channel name. For more information, refer to the info-center channel
name command.
Table 1-1 Information channels for different output destinations
Output destination
Console
Monitor terminal
Log host
Trap buffer
Log buffer
SNMP NMS
Log file
Description
Use the display channel command to display channel information.
Chapter 1 Information Center Configuration
Commands
Information channel
number
0
1
2
3
4
5
9
1-1
Commands
Default channel name
console
monitor
loghost
trapbuffer
logbuffer
snmpagent
channel9