Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches
#
super password level 3 cipher =`*Y=F>*.%-a_SW8\MYM2A!!
1.1.20 sysname
Syntax
sysname sysname
undo sysname
View
System view
Parameters
sysname: Name of the device, a string of 1 to 30 characters.
Description
Use the sysname command to set the name of the device.
Use the undo sysname demand to restore the device name to the default.
The default name is H3C.
Modifying device name affects the prompt of the CLI. For example, if the device name
is Sysname, the prompt of user view is <Sysname>.
Examples
# Set the name of the device to R2000.
<Sysname> system-view
[Sysname] sysname R2000
[R2000]
1.1.21 system-view
Syntax
system-view
View
User view
Parameters
None
Description
Use the system-view command to enter system view from the current user view.
Chapter 1 Basic Configuration Commands
1-22