H3C S7500E Series Command Manual page 1206

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches
View
Any view
Parameters
interface-type interface-number: Specifies a port by its type and number.
Description
Use the display rmon statistics command to display RMON statistics.
Related commands: rmon statistics.
Examples
# Display RMON statistics for interface Ethernet 3/0/3.
<Sysname> display rmon statistics Ethernet 3/0/3
Statistics entry 6 owned by aa
Interface : Ethernet3/0/3<ifIndex.5>
etherStatsOctets
etherStatsBroadcastPkts
etherStatsUndersizePkts
etherStatsFragments
etherStatsCRCAlignErrors : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64
256-511: 0
Table 2-6 Description on the fields of the display rmon statistics command
Statistics entry
VALID
Interface
etherStatsOctets
etherStatsPkts
etherStatsBroadcastPkts
: 0
: 0
: 0
: 0
: 0 , 65-127
, 512-1023: 0
Field
Chapter 2 RMON Configuration Commands
is VALID.
, etherStatsPkts
, etherStatsMulticastPkts : 0
, etherStatsOversizePkts
, etherStatsJabbers
, etherStatsCollisions
: 0 ,
,
Description
Statistics table entry index
Status of the entry identified by the index (VALID
means the entry is valid, and UNDERCREATION
means invalid. You can use the display rmon
command to view the invalid entry and with the
display current-configuration and display this
commands you cannot view the corresponding rmon
commands.)
Interface on which statistics are gathered
Number of octets received by the interface during the
statistical period
Number of packets received by the interface during
the statistical period
Number of broadcast packets received by the
interface during the statistical period
2-8
: 0
: 0
: 0
: 0
128-255 : 0
1024-1518: 0