H3C S7500E Series Command Manual page 1253

Command Manual – File System Management
H3C S7500E Series Ethernet Switches
Parameters
file-url: File name.
Description
Use the more command to display the contents of the specified file.
So far, this command is valid only for .txt files.
Examples
# Display the contents of file test.txt.
<Sysname> more test.txt
AppWizard has created this test application for you.
This file contains a summary of what you will find in each of the files that
make up your test application.
Test.dsp
This file (the project file) contains information at the project level and is
used to build a single project or subproject. Other users can share the project
(.dsp) file, but they should export the makefiles locally.
1.1.11 mount
Syntax
mount device
View
User view
Parameters
device: Storage device name (for example flash or cf).
Description
Use the mount command to mount a hot swappable storage device, such as a CF card,
a USB device, etc (excluding Flash). This command is effective only when the device is
in unmounted state.
By default, a storage device is in the mounted state, that is, you can use it without
mounting it.
Note that:
Do not remove the storage device or swap the board when mounting or
unmounting the device, or when you are processing files on the storage device.
Otherwise, the file system could be damaged.
Chapter 1 File System Management Commands
1-8