Sftp Client Source; Sftp Ipv6 - H3C S7500E Series Command Manual

Command Manual – SSH
H3C S7500E Series Ethernet Switches
<Sysname> system-view
[Sysname] sftp client ipv6 source ipv6 2:2::2:2

1.1.18 sftp client source

Syntax
sftp client source { ip ip-address | interface interface-type interface-number }
undo sftp client source
View
System view
Parameters
ip ip-address: Specifies a source IPv4 address.
interface interface-type interface-number: Specifies a source interface by its type and
number.
Description
Use the sftp client source command to specify the source IPv4 address or interface of
an SFTP client.
Use the undo sftp source-interface command to remove the configuration.
By default, a client uses the IP address or interface specified by the route to access the
SFTP server.
Related commands: display sftp client source.
Examples
# Specify the source IP address of the SFTP client as 192.168.0.1.
<Sysname> system-view
[Sysname] sftp client source ip 192.168.0.1

1.1.19 sftp ipv6

Syntax
sftp ipv6 server [ port-number ] [ prefer-ctos-cipher { 3des | aes128 | des } |
prefer-ctos-hmac
{ dh-group-exchange | dh-group1 | dh-group14 } | prefer-stoc-cipher { 3des |
aes128 | des } | prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 } ] *
View
User view
{ md5 | md5-96
1-16
Chapter 1 SSH Configuration Commands
| sha1 | sha1-96 } | prefer-kex