Display Poe-Power Dc-Output State - H3C S7500E Series Command Manual

Command Manual – PoE
H3C S7500E Series Ethernet Switches
Examples
# Display the alarm information of the PoE power.
<Sysname> display poe-power alarm
PSU Number
PSU 1 State
PSU 2 State
PSU 3 State
Table 1-9 Description on the fields of the display poe-power alarm command
Field
PSU Number
PSU x State

1.1.11 display poe-power dc-output state

Syntax
display poe-power dc-output state
View
Any view
Parameters
None
Description
Use the display poe-power dc-output state command to display the state information
of the DC output power
Examples
# Display the state information of the DC output power.
<Sysname> display poe-power dc-output state
: 3
: Normal
: Disconnect
: Over Voltage
Number of PSUs
PSU state:
Normal: The PSU is normal.
Disconnect: The PSU is disconnected.
Input Error: An input error occurs to the PSU.
Output Error: An output error occurs to the PSU.
Over Voltage: An over-voltage occurs to the PSU.
Over Temperature: An over-temperature occurs to the PSU.
Fan Error: A fault occurs to the fan of the PSU.
Shut Down: The PSU is shut down.
Current Restricted: The current of the PSU is restricted.
1-17
Chapter 1 PoE Configuration Commands
Over Temperature
Description