Display Rmon History - H3C S7500E Series Command Manual

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches
including event index, current event state, time the event was logged (the elapsed time
in seconds since system initialization/startup), and event description.
Examples
# Display the RMON log information for event entry 1.
<Sysname> display rmon eventlog 1
Event table 1 owned by user1 is VALID.
Generates eventLog 1.1 at 0days 00h:01m:39s.
Description: The 1.3.6.1.2.1.16.1.1.1.4.1 defined in alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Generates eventLog 1.2 at 0days 00h:02m:27s.
Description: The alarm formula defined in private alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Table 2-3 Description on the fields of the display rmon eventlog command
Event table
owned by
VALID
Generates eventLog at
Description

2.1.4 display rmon history

Syntax
display rmon history [ interface-type interface-number ]
View
Any view
Parameters
interface-type interface-number: Specifies a port by its type and number.
Field
Event index
Owner of the entry
Status of the entry identified by the index (VALID means
the entry is valid, and UNDERCREATION means
invalid. You can use the display rmon command to
view the invalid entry and with the display
current-configuration and display this commands
you cannot view the corresponding rmon commands.)
Time the log was created
Log description
Chapter 2 RMON Configuration Commands
Description
2-4