Display Rmon Event - H3C S7500E Series Command Manual

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches
VALID
Samples type
Variable formula
Sampling interval
Rising threshold
Falling threshold
When startup enables
Latest value

2.1.2 display rmon event

Syntax
display rmon event [ entry-number ]
View
Any view
Parameters
entry-number: Index of an RMON event entry, in the range 1 to 65535. If no entry is
specified, the configuration of all event entries is displayed.
Description
Use the display rmon event command to display the configuration of the specified or
all RMON event entries.
Displayed information includes event index, event owner, event description, action
triggered by the event (such as sending log or trap messages), and last time the event
occurred (the elapsed time since system initialization/startup) in seconds.
Related commands: rmon event.
Field
Status of the entry identified by the index (VALID means
the entry is valid, and UNDERCREATION means
invalid. You can use the display rmon command to
view the invalid entry and with the display
current-configuration and display this commands
you cannot view the corresponding rmon commands.)
The sampling type (absolute in this example)
Formula for the sampling value
Sampling interval
Alarm rising threshold (When the sampling value is
bigger than or equal to this threshold, a rising alarm is
triggered.)
Alarm falling threshold (When the sampling value is
smaller than or equal to this threshold, a falling alarm is
triggered.)
How an alarm can be triggered
The last sampled value
Chapter 2 RMON Configuration Commands
Description
2-2