Display Bgp Ipv6 Routing-Table Different-Origin-As - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Examples
# Display IPv6 BGP routing dampening parameters.
<Sysname> display bgp ipv6 routing-table dampening parameter
Maximum Suppress Time(in second)
Ceiling Value
Reuse Value
HalfLife Time(in
Suppress-Limit
Table 5-7 Description on the above fields
Maximum Suppress Time
Ceiling Value
Reuse Value
HalfLife Time
Suppress-Limit

5.1.20 display bgp ipv6 routing-table different-origin-as

Syntax
display bgp ipv6 routing-table different-origin-as
View
Any view
Parameters
None
Description
Use the display bgp ipv6 routing-table different-origin-as command to display IPv6
BGP routes originating from different autonomous systems.
Examples
# Display routes from different ASs.
<Sysname> display bgp ipv6 routing-table different-origin-as
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
second)
Field
h - history, i - internal, s - suppressed, S - Stale
5-19
Chapter 5 IPv6 BGP Configuration Commands
: 3069
: 16000
: 750
: 900
: 2000
Description
Maximum Suppress Time
Upper limit of penalty value
Reuse Value
Half life Time
Suppress value