Display Snmp-Agent Group - H3C S7500E Series Command Manual

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches
Description
Use the display snmp-agent community command to display community information
for SNMPv1 or SNMPv2c.
Examples
# Display the information for all the current communities.
<Sysname> display snmp-agent community
Community name: aa
Group name: aa
Acl:2001
Storage-type: nonVolatile
Community name: bb
Group name: bb
Storage-type: nonVolatile
Table 1-1 Descriptions on the fields of display snmp-agent community
Field
Community name
Group name
Acl
Storage-type

1.1.3 display snmp-agent group

Syntax
display snmp-agent group [ group-name ]
View
Any view
Parameters
group-name: Specifies the SNMP group name, a string of 1 to 32 characters, case
sensitive.
Community name
SNMP group name
The number of the ACL in use
Storage type, which could be:
volatile: Information will be lost if the system is rebooted
nonVolatile: Information will not be lost if the system is
rebooted
permanent: Modification permitted, but deletion forbidden
readOnly: Read only, that is, no modification, no deletion
other: Other storage types
1-2
Chapter 1 SNMP Configuration Commands
Description