Display Bgp Ipv6 Routing-Table Community-List - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Parameters
aa:nn: Specifies a community number; both aa and nn are in the range 0 to 65535.
&<1-13>: Indicates the argument before it can be entered up to 13 times.
no-advertise: Displays routes not advertised to any peer.
no-export: Displays routes advertised outside the AS; if there is a confederation, it
displays routes not advertised outside the confederation, but to other sub ASs in the
confederation.
no-export-subconfed: Displays routes neither advertised outside the AS nor to other
sub ASs if the confederation is configured.
whole-match: Displays the exactly matched routes.
Description
Use the display bgp ipv6 routing-table community command to display the routing
information of the specified community.
Examples
# Display the routing information of the community no-export.
<Sysname> display bgp ipv6 routing-table community no-export
BGP Local router ID is 30.30.30.1
Status codes: * - valid, > - best, d - damped,
*> Network : 30:30::
NextHop : 30:30::30:1
PrefVal : 0
MED
Path/Ogn: i
Refer to

5.1.17 display bgp ipv6 routing-table community-list

Syntax
display bgp ipv6 routing-table community-list { basic-community-list-number
[ whole-match ] | adv-community-list-number }&<1-16>
View
Any view
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
: 0
Table 5-5 for description on the fields above.
Chapter 5 IPv6 BGP Configuration Commands
i - internal, s - suppressed, S - Stale
5-16
PrefixLen : 64
LocPrf :
Label : NULL