H3C S7500E Series Command Manual page 561

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Description
Use the display ospfv3 peer command to display OSPFv3 neighbor information.
If no area-id is specified, the neighbor information of all areas is displayed.
If no process-id is specified, the information of all processes is displayed.
If no interface or neighbor Router-ID is specified, the neighbor information of all
interfaces is displayed.
Examples
# Display the neighbor information of OSPFv3 process 1 on an interface.
<Sysname> display ospfv3 1 peer Vlan-interface 400
OSPFv3 Area (0.0.0.2)
Neighbor ID
3.3.3.3
Table 3-7 Description on the fields of the display ospfv3 peer command
Neighbor ID
Pri
State
Dead Time
Interface
Instance ID
# Display detailed neighbor information of OSPFv3 process 1 of an interface.
<Sysname> display ospfv3 1 peer Vlan-interface 400 verbose
Neighbor: 3.3.3.3, interface address: FE80::2E0:FCFF:FE00:242A
In the area 0.0.0.2 via interface Vlan-interface400
DR is 4.4.4.4 BDR is 3.3.3.3
Options is 0x000011 (-|R|-|-|-|V6)
Dead timer due in 00:00:35
Database Summary List 0
Link State Request List 0
Link State Retransmission List 0
OSPFv3 Process (1)
Pri State
1 Full/Backup
Field
OSPFv3 Process (1)
3-13
Chapter 3 IPv6 OSPFv3 Configuration Commands
Dead Time Interface
00:00:38 Vlan400
Description
Neighbor ID
Priority of neighbor router
Neighbor state
Dead time remained
Interface connected to the neighbor
Instance ID
Instance ID
0