Peer-Public-Key End; Public-Key-Code Begin - H3C S7500E Series Command Manual

Command Manual – SSH
H3C S7500E Series Ethernet Switches
Table 1-7 Description on fields of the display ssh user-information command
Username
Authentication-type
User-public-key-name
Service-type

1.1.8 peer-public-key end

Syntax
peer-public-key end
View
Public key view
Parameters
None
Description
Use the peer-public-key end command to return from public key view to system view.
Related commands: public-key peer.
Examples
# Exit public key view.
<Sysname> system-view
[Sysname] public-key peer key1
[Sysname-pkey-public-key] peer-public-key end
[Sysname]

1.1.9 public-key-code begin

Syntax
public-key-code begin
View
Public key view
Parameters
None
Field
1-8
Chapter 1 SSH Configuration Commands
Description
Name of the user
Authentication type
Public key of the user
Service type