Ipv6 Pathmtu; Ipv6 Pathmtu Age - H3C S7500E Series Command Manual

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches
Examples
# Set the maximum number of neighbors that can be dynamically learned on
VLAN-interface 100 to 10.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 neighbors max-learning-num 10

1.1.35 ipv6 pathmtu

Syntax
ipv6 pathmtu ipv6-address [ value ]
undo ipv6 pathmtu ipv6-address
View
System view
Parameters
ipv6-address: Specified IPv6 address.
value: PMTU of a specified IPv6 address in bytes. The value range and the default
value vary with devices. It ranges from 1280 to 10000.
Description
Use the ipv6 pathmtu command to configure a static PMTU for a specified IPv6
address.
Use the undo ipv6 pathmtu command to remove the PMTU configuration for a
specified IPv6 address.
By default, no static PMTU is configured.
Examples
# Configure a static PMTU for a specified IPv6 address.
<Sysname> system-view
[Sysname] ipv6 pathmtu fe80::12 1300

1.1.36 ipv6 pathmtu age

Syntax
ipv6 pathmtu age age-time
undo ipv6 pathmtu age
Chapter 1 IPv6 Basics Configuration Commands
1-37