H3C S7500E Series Command Manual page 1303

Command Manual – Information Center
H3C S7500E Series Ethernet Switches
View
Any view
Parameters
None
Description
Use the display info-center command to display configurations on each output
destination.
Examples
# Display configurations on each output destination.
<Sysname> display info-center
Information Center:enabled
Log host:
2.2.2.2, channel number : 8, channel name : channel8,
host facility local7
Console:
channel number : 0, channel name : console
Monitor:
channel number : 1, channel name : monitor
SNMP Agent:
channel number : 5, channel name : snmpagent
Log buffer:
enabled,max buffer size 1024, current buffer size 512,
current messages 512, dropped messages 0, overwritten messages 740
channel number : 4, channel name : logbuffer
Trap buffer:
enabled,max buffer size 1024, current buffer size 256,
current messages 216, dropped messages 0, overwritten messages 0
channel number : 3, channel name : trapbuffer
logfile:
channel number:9, channel name:channel9
Information timestamp setting:
log - date, trap - date, debug - date,
loghost - date
Chapter 1 Information Center Configuration
1-3
Commands