Ipv6 Nd Ra Router-Lifetime - H3C S7500E Series Command Manual

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches
View
Interface view
Parameters
ipv6-address: IPv6 address or IPv6 address prefix.
prefix-length: Prefix length of an IPv6 address.
ipv6-prefix: IPv6 address prefix.
valid-lifetime: Valid lifetime of a prefix in seconds, in the range of 0 to 4,294,967,295.
preferred-lifetime: Preferred lifetime of a prefix used for stateless auto-configuration in
seconds, in the range of 0 to 4,294,967,295.
no-autoconfig: Specifies a prefix not to be used for stateless auto-configuration. If this
keyword is not provided, the prefix is used for stateless auto-configuration.
off-link: Specifies the address with the prefix not to be directly reachable on the link. If
this keyword is not provided, the address with the prefix is directly reachable on the link.
Description
Use the ipv6 nd ra prefix command to configure the prefix information in RA
messages.
Use the undo ipv6 nd ra prefix command to remove the prefix information from RA
messages.
By default, no prefix information is configured in RA messages and the IPv6 address of
the interface sending RA messages is used as the prefix information.
Examples
# Configure the prefix information for RA messages on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd ra prefix 2001:10::100/64 100 10

1.1.32 ipv6 nd ra router-lifetime

Syntax
ipv6 nd ra router-lifetime value
undo ipv6 nd ra router-lifetime
View
Interface view
Chapter 1 IPv6 Basics Configuration Commands
1-34