Display Transceiver Diagnosis Interface - H3C S7500E Series Command Manual

Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches
Table 3-8 Description on the fields of display transceiver alarm interface
transceiver current alarm information
TX fault

3.1.14 display transceiver diagnosis interface

Syntax
display transceiver diagnosis interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type interface-number: Interface type and interface number.
Description
Use the display transceiver diagnosis interface command to display the currently
measured value of digital diagnosis parameters of a single or all anti-spoofing
transceivers customized by H3C.
Examples
# Display the currently measured value of digital diagnosis parameters of the
anti-spoofing pluggable optical transceiver customized by H3C on interface
GigabitEthernet 2/0/2.
<Sysname> display transceiver diagnosis interface gigabitethernet 2/0/2
GigabitEthernet2/0/2 transceiver diagnostic information:
Current diagnostic parameters:
Temp(°C)
36
Table 3-9 Description on the fields of display transceiver diagnosis interface
transceiver diagnostic information
Current diagnostic parameters
Temp(°C)
Field
Voltage(V) Bias(mA)
3.31 6.13
Field
3-16
Chapter 3 Device Management Commands
Description
Current alarm information of the
transceiver
TX fault
RX power(dBM) TX power(dBM)
-35.64 -5.19
Description
Digital diagnosis information of the transceiver
carried by an interface
Current diagnostic parameters
Digital diagnosis parameter-temperature, in
°C, with the precision to 1°C.