Chapter 1 Poe Configuration Commands; Poe Configuration Commands; Apply Poe-Profile - H3C S7500E Series Command Manual

Command Manual – PoE
H3C S7500E Series Ethernet Switches

Chapter 1 PoE Configuration Commands

1.1 PoE Configuration Commands

1.1.1 apply poe-profile

Syntax
apply poe-profile { index index | name profile-name }
undo apply poe-profile { index index | name profile-name }
View
PoE interface view
Parameters
index index: Index number of the PoE configuration file, in the range 1 to 100.
name profile-name: Name of the PoE configuration file, a string of 1 to 15 characters.
Description
Use the apply poe-profile command to apply the PoE configuration file to the current
PoE interface.
Use the undo apply poe-profile command to remove the application of the PoE
configuration file to the current PoE interface.
Note that the index number, instead of the name, of the PoE configuration file is
displayed when you execute the display this command.
Related commands: display poe-profile, apply poe-profile interface.
Examples
# Apply the PoE configuration file named A20 to the PoE interface Ethernet 2/0/2.
<Sysname> system-view
[Sysname] interface Ethernet 2/0/2
[Sysname-Ethernet2/0/2] apply poe-profile name A20
[Sysname-Ethernet2/0/2] display this
#
interface Ethernet2/0/2
apply poe-profile index 1
#
Chapter 1 PoE Configuration Commands
1-1