H3C S7500E Series Command Manual page 1292

Command Manual – File System Management
H3C S7500E Series Ethernet Switches
Parameters
username: Other login username.
password: Login password.
Description
Use the user command to relog onto the currently accessing FTP server with other
username after you have logged onto the FTP server.
Before using this command, you must configure the corresponding username and
password on the FTP server; otherwise, you login fails and the FTP connection is
closed.
Examples
# User ftp1 has logged onto the FTP server and relogs onto the current FTP server with
the username of ftp2. (Suppose username ftp2 and password 123123123123 have
been configured on the FTP server).
[ftp] user ftp2
331 Password required for ftp2.
Password:
230 User logged in.
[ftp]
2.2.28 verbose
Syntax
verbose
undo verbose
View
FTP client view
Parameters
None
Description
Use the verbose command to enable the verbose function to display detailed prompt
information.
Use the undo verbose command to disable the verbose function.
By default, the verbose function is enabled.
Chapter 2 FTP Configuration Commands
2-26